Ultra-thin fireproof paint Ultra-thin fireproof coating

Sichuan Chengdu Ultra-Thin Fireproof Paint/Ultra-Thin Fireproof Coating - Indoor and Outdoor Steel Structure Fireproof Coating; Manager Sun: 152◇0825◇6966; Indoor intumescent ultra-thin steel structure fireproof coating features easy application, strong adhesion, excellent decorative performance, ultra-thin coating, and good fire resistance. When exposed to fire or heat, the coating rapidly expands and foams, forming a sponge-like fireproof and thermal insulation layer. This prevents the steel structure from bending or collapsing easily in a fire, enhancing its fire resistance limit to achieve fire protection. It offers excellent decorative performance and can be color-customized according to actual needs.

Fireproof Coating Performance Characteristics:

1. Excellent fire and thermal insulation, capable of withstanding prolonged high-temperature flame impact from hydrocarbon fires.

2. Strong adhesion, good weather resistance, resistant to wind, rain, sun, and humidity; frost-resistant, non-peeling, non-flaking, non-aging, and durable.

3. Free of asbestos and other harmful substances to the human body, odorless, and does not emit toxic gases in case of fire.

4. Easy to use, simple construction process, and good workability.

Usage Instructions and Precautions:

Indoor ultra-thin steel structure fireproof coating can be applied using brushing, mechanical spraying, or other construction methods;

The surface of steel structure components should be derusted and treated for rust and corrosion prevention;

Before construction, dust, grease, moisture, etc., on the surface of steel structure components should be cleaned. Coating operations on damp surfaces are strictly prohibited.

The product must be thoroughly stirred before use; it should not be mixed with other coatings, paints, water, etc., to avoid compromising its fireproof performance;

During construction, the first coat should be approximately 0.3mm thick. After the coating dries, apply the next coat, with each coat about 0.5mm thick. Ensure no missed spots in each coat. The interval between coats should be 6–8 hours or more, depending on drying conditions, until the coating thickness meets design requirements;

The construction environment temperature should be between 5–38°C, with relative humidity not exceeding 85%, and adequate air circulation. Construction is not advisable when wind speed exceeds 5m/s, during rainy weather, or when surfaces are condensing.

After construction, the coating should be protected from rain, immersion, and prolonged dampness. Curing is required to achieve its performance requirements.

This site's articles are sourced from the network, for display purposes only. The copyright belongs to the original author. If there is any discomfort, please inform us, and we will remove it promptly.